BRDTH - AMMONIUM MOLYBDATE, 251

  • MSDS: BRDTH
  • Manufacturer: BETZ LABORATORIES INC
  • Product Name: AMMONIUM MOLYBDATE, 251
  • National Stock Number: 6810-00N037799
Product Identification

Product ID:AMMONIUM MOLYBDATE, 251
MSDS Date:05/18/1989
FSC:6810
NIIN:00N037799
MSDS Number: BRDTH

Responsible Party
BETZ LABORATORIES INC
4636 SOMERTON RD
TREVOSE, PA 19047
US

Emergency Phone: 215-355-3300

Info Phone: 215-355-3300

Cage: 24774

Contractor
BETZDEARBORN INC.
TREVOSE, PA 19053 US

Telephone: 215-355-3300

Cage: 24774

Ingredients

MOLYBDIC ACID, DIAMMONIUM SALT; (AMMONIUM MOLYBDATE)

CAS: 13106-76-8

RTECS: QA4900000

OSHA PEL 5 MG/M3 (MO)

ACGIH TLV: 5 MG/M3 (MO)

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: SKIN: SLIGHTY IRRITATING TO
SKIN. EYE: MODERATELY IRRITATING TO EYES. INHAL: MISTS/AEROSOLS MAY
CAUSE IRRITATION TO UPPER RESPIRATORY TRACT. CHRONIC: NO EVIDENCE
OF POTENTIAL CHRONIC EFFECTS. M AY BE TOXIC IF ORALLY INGESTED.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:INHALATION MAY CAUSE IRRITATION OF RESPIRATORY
TRACT; SKIN CONTACT MAY CAUSE ITCHING AND/OR REDNESS.
Medical Cond Aggravated by Exposure:NOT KNOWN.

First Aid

First Aid:SKIN:REMOVE CONTAM CLTHG. WASH EXPOSED AREA W/LRG QTYS OF
SOAP SOLN/WATER FOR 15 MIN. EYE: IMMED FLUSH EYES W/WATR FOR @ LST
15 MIN. IMMED CNTCT MD FOR ADDTNL TREATMENT. INHAL:REMOVE VICTIM
FROM CONTA M AREA TO FRESH AIR. APPLY APPROP FIRSTAID TREATMENT AS
NEC. INGEST: GEN-DO NOT FEED ANYTHING BY MOUTH TO AN UNCON OR
CONVULSIVE VICTIM. SPECIFIC-DILUTE CONTENTS OF STOMACH. INDUCE
VOMIT (SUPP DATA)

Fire Fighting

Flash Point Method:SCC
Flash Point:>200F,>93C
Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE, FOAM OR WATER.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:GEN-VENT AREA, USE SPECIFIED PROT EQUIP.
CONTAIN & ABSORB ON ABSORB MATL. PLACE IN WASTE DISP CNTNR. THE
WASTE CHARAC OF THE ABSORB MATL, OR ANY CONTAM SOIL, SHLD BE
DETERMINED I/A/W RCRA REGS. SPECIF IC-FLUSH AREA W/WATER. WET AREA
MAY BE (UPP DATA)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE.
DO NOT FREEZE. IF FROZEN, THAW AND MIX COMPLETELY PRIOR TO USE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATORS WITHIN USE
LIMITATIONS OR ELSE USE NIOSH/MSHA APPROVED SUPPLIED AIR
RESPIRATORS. IF VENT IS INADEQ OR SIGNIFICANT REAGENT EXPOSURE IS
LIKELY, USE NIOSH/MSHA APPROVE D RESP WITH DUST/MIST FILTERS.
Ventilation:ADEQUATE VENT TO MAINTAIN AIR CONTAM BELOW EXPOSURE LIMITS.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:REMOVE CONTAMINATED CLOTHING, WASH BEFORE
REUSE. NORMAL CHEMICAL HANDLING.
Supplemental Safety and Health
FIRST AID: BY ONE OF THE STANDARD METHODS. IMMEDIATELY CONTACT A
PHYSICIAN. SPILL PROC: SLIPPERY. SPREAD SAND/GRIT. WASTE DISP METH:
AND LOCAL REGULATIONS .

Chemical Properties

Spec Gravity:1.0
Evaporation Rate & Reference:< 1 (ETHER=1)
Solubility in Water:100 %
Appearance and Odor:COLORLESS LIQUID, NO ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:YIELDS ELEMENTAL OXIDES.

Disposal

Waste Disposal Methods:GEN-WATER CONTAM W/THIS REAGENT MAY BE SENT TO A
SANITARY SEWER, I/A/W ANY LOCAL AGREEMENT, A TREATMENT FACILITY OR
DISCHARGED UNDER A NPDES PERMIT. REAGENT (AS IS)-INCINERATE/BURY IN
APPROVED LANDFIL L. DISP MUST BE I/A/W FEDERAL, STATE (SUPP DATA)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.